Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
Bronze

qos values and input and output queues

hi every body!

-----f1(SW1)f2--------

Just for illustrative purpose, i am assuming simple values for qos

say qos=1 mean queue 1( frames in this queue will get serviced first)

if sw1 receives a frame with qos=1, sw1 processes the frame provided that qos=1 remain unchanged , will switch 1 place this frame in the queue for outgoing int which will be processsed first?

thanks a lot and have a nice day!

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: qos values and input and output queues

Sarah

Assuming you want these packets to be serviced first on egress then you would want to place these packets into the priority queue if the switch port supports a priority queue.

If there is no priority queue then you can map it to a one of the other queues that gets preferential treatment but that is not the same as the priority queue.

Has this answered your question or have i missed the point :)

Jon

2 REPLIES
Hall of Fame Super Blue

Re: qos values and input and output queues

Sarah

Assuming you want these packets to be serviced first on egress then you would want to place these packets into the priority queue if the switch port supports a priority queue.

If there is no priority queue then you can map it to a one of the other queues that gets preferential treatment but that is not the same as the priority queue.

Has this answered your question or have i missed the point :)

Jon

Bronze

Re: qos values and input and output queues

thanks for your reply Jon!

169
Views
0
Helpful
2
Replies
CreatePlease to create content