Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

QOS

Hi ALL,

I have this configuration in global mode

priority-list 1 protocol ip high list 190

priority-list 1 interface GigabitEthernet1/1 high

and this configuration on interface

interface GigabitEthernet1/3

dampening

ip address x.x.x.x x.x.x.x

no ip redirects

no ip unreachables

no ip proxy-arp

ip route-cache flow

ip policy route-map RMR-VPN

speed 100

duplex full

Dont i have to use policy group command on the interface to apply the PQ configuration.

more over my Queuing method on the interface is showing as FIFO.

Chao

Vishwa

5 REPLIES
Hall of Fame Super Gold

Re: QOS

Hi, such configuration on Gigabit makes no sense, since the interface is so fast it never sees congestion, consequently no QoS can be applied.

Beside that, the ip priority old mechanism is not compatible with modular QoS.

Please clarify what problem are you trying to solve.

New Member

Re: QOS

Hi ,

I am facing problem with voice traffic any trying to implement qos for voice.

Chao

Vishwa

Hall of Fame Super Gold

Re: QOS

You need to implement QoS on the device facing the WAN circuit. If you can't do that, you need to explain your topology in full detail.

In any case since clearly you're not a networking person I suggest you hire a reputable professional to save you time and frustration.

Re: QOS

Hi,

You should add an ACL permiting specific traffic to be used by High priority Queue.

You should also change The Priority Queue Interface to be G1/3.

HTH

Mohamed

New Member

Re: QOS

Hi Mohamed,

If i am using

priority-list 1 protocol ip high list 190

along with access-list 190

do i need priority-list 1 interface gi1/3

i guess not.

115
Views
0
Helpful
5
Replies