05-29-2012 02:19 PM - edited 03-04-2019 04:30 PM
Hello,
I have downloaded the latest IOS ( asr1000rp1-adventerprisek9.03.06.00.S.152-2.S.bin ) and I was trying to upgrade the IOS on the ASR1002 but I could not find a specific document regarding this matter. I copied the new IOS file to bootflash and added "boot system flash bootflash:asr1000rp1-adventerprisek9.03.06.00.S.152-2.S" to the config but when I reboot the ASR router, it uses the old IOS image. I wonder if anyone knows the process to upgrade the IOS on ASR series.
Thank you,
Ray
Solved! Go to Solution.
05-29-2012 02:41 PM
Try this string instead: boot flash bootflash:/
Can you also post the output to the following commands:
1. sh run | b boot-start-marker
2. sh platform
05-29-2012 02:38 PM
Hi,
Have a look at this link for upgrade process for ASR routers:
http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/chassis/issu.html#wp1136595
HTH
05-29-2012 02:41 PM
Try this string instead: boot flash bootflash:/
Can you also post the output to the following commands:
1. sh run | b boot-start-marker
2. sh platform
05-29-2012 03:03 PM
Thank you for your respones. When I changed the boot command (as mentioned by leo) :
boot system flash bootflash:/asr1000rp1-adventerprisek9.03.06.00.S.152-2.S.bin
Now after reboot "show version" shows:
System image file is "bootflash:/asr1000rp1-adventerprisek9.03.06.00.S.152-2.S.bin"
Thank you,
Ray
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide