Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Question about ASR1000 routers - software upgrade

Hello,

I have downloaded the latest IOS ( asr1000rp1-adventerprisek9.03.06.00.S.152-2.S.bin ) and I was trying to upgrade the IOS on the ASR1002 but I could not find a specific document regarding this matter. I copied the new IOS file to bootflash and added "boot system flash bootflash:asr1000rp1-adventerprisek9.03.06.00.S.152-2.S" to the config but when I reboot the ASR router, it uses the old IOS image. I wonder if anyone knows the process to upgrade the IOS on ASR series.

Thank you,

Ray

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Question about ASR1000 routers - software upgrade

Try this string instead:  boot flash bootflash:/.bin

Can you also post the output to the following commands:

1.  sh run | b boot-start-marker

2.  sh platform

3 REPLIES
VIP Super Bronze

Question about ASR1000 routers - software upgrade

Hi,

Have a look at this link for upgrade process for ASR routers:

http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/chassis/issu.html#wp1136595

HTH

Hall of Fame Super Gold

Question about ASR1000 routers - software upgrade

Try this string instead:  boot flash bootflash:/.bin

Can you also post the output to the following commands:

1.  sh run | b boot-start-marker

2.  sh platform

New Member

Question about ASR1000 routers - software upgrade

Thank you for your respones. When I changed the boot command (as mentioned by leo)  :

boot system flash bootflash:/asr1000rp1-adventerprisek9.03.06.00.S.152-2.S.bin

Now after reboot "show version" shows:

System image file is "bootflash:/asr1000rp1-adventerprisek9.03.06.00.S.152-2.S.bin"

Thank you,

Ray

1375
Views
0
Helpful
3
Replies
CreatePlease to create content