12-04-2013 02:07 AM - edited 03-04-2019 09:45 PM
Hi
I have cisco 2811 router and want to configure it for pppoe server .I've tested most of them (IOS) . But did not support PPPOE protocol.
Which version should I use for it?
Thank you
Pedram Rabeti
Solved! Go to Solution.
12-04-2013 04:10 AM
Pedram,
The PPPoE server functionality should be available in all recent IOS versions for 2811, starting with 12.4. I can confirm that 12.4 and newer with Advanced IP Services feature set we're using in our labs supports PPPoE.
Check for these commands:
bba-group pppoe global
interface FastEthernet0/0
pppoe enable group global
If these commands are available then the PPPoE server functionality is available as well.
Best regards,
Peter
12-04-2013 04:10 AM
Pedram,
The PPPoE server functionality should be available in all recent IOS versions for 2811, starting with 12.4. I can confirm that 12.4 and newer with Advanced IP Services feature set we're using in our labs supports PPPoE.
Check for these commands:
bba-group pppoe global
interface FastEthernet0/0
pppoe enable group global
If these commands are available then the PPPoE server functionality is available as well.
Best regards,
Peter
12-09-2013 11:55 PM
Hi
Thank you for answer Peter
Best regard
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide