Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Question About IOS Ver for pppoe server

Hi

I have cisco 2811 router and want to configure it for pppoe server .I've tested most of them (IOS) . But did not support PPPOE protocol.

Which version should I use for it?

Thank you

Pedram Rabeti

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Question About IOS Ver for pppoe server

Pedram,

The PPPoE server functionality should be available in all recent IOS versions for 2811, starting with 12.4. I can confirm that 12.4 and newer with Advanced IP Services feature set we're using in our labs supports PPPoE.

Check for these commands:

bba-group pppoe global

interface FastEthernet0/0

pppoe enable group global

If these commands are available then the PPPoE server functionality is available as well.

Best regards,

Peter

2 REPLIES
Cisco Employee

Question About IOS Ver for pppoe server

Pedram,

The PPPoE server functionality should be available in all recent IOS versions for 2811, starting with 12.4. I can confirm that 12.4 and newer with Advanced IP Services feature set we're using in our labs supports PPPoE.

Check for these commands:

bba-group pppoe global

interface FastEthernet0/0

pppoe enable group global

If these commands are available then the PPPoE server functionality is available as well.

Best regards,

Peter

New Member

Question About IOS Ver for pppoe server

Hi

Thank you  for answer   Peter

Best regard

125
Views
0
Helpful
2
Replies