Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Question about QoS

Hi, I would like to know the opinion of you on how packets are marked in the following example (attached file).

Is this a correct way to do this ?  Are decimal values​ correct in each class?

Thank you very much.

 

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

DisclaimerThe Author of this

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

Without knowing what your QoS objectives are, it's impractical to comment on your markings.

I haven't deeply reviewed your markings, but at first glance they don't appear to all correspond to Cisco or RFC marking recommendations.

Further, don't know what expect from your Olympic classifications.

Have you read Cisco's http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND_40/QoSIntro_40.html? ; If not, good document to start.

You might also look at documents available via: http://www.cisco.com/c/en/us/products/ios-nx-os-software/quality-of-service-qos/index.html.

1 REPLY
Super Bronze

DisclaimerThe Author of this

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

Without knowing what your QoS objectives are, it's impractical to comment on your markings.

I haven't deeply reviewed your markings, but at first glance they don't appear to all correspond to Cisco or RFC marking recommendations.

Further, don't know what expect from your Olympic classifications.

Have you read Cisco's http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND_40/QoSIntro_40.html? ; If not, good document to start.

You might also look at documents available via: http://www.cisco.com/c/en/us/products/ios-nx-os-software/quality-of-service-qos/index.html.

55
Views
0
Helpful
1
Replies