Basically we are some content provider hosted through our website and these service is hosted in the 2 data center Site A and B. We have client
worldwide. Currently we are going through a network restructuring and we have registered our ASN number (100) and our own ip block of /22 in this diagram. Question is that knowing all the client we had ,can we provide a best routing path for our client to connect to our service using BGP AS_path configuration in our router? Such that user in ISP C will be directed to Site A rather than site B in this case. Or rather this routing is done via ISP level?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...