Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Question on inbound QoS policy from MPLS provider

I'm getting complaints about echoing VOIP coming in from a branch office.  My outbound service policy seems to be working just fine. I have not implemented an incoming policy as I thought I could just trust dscp coming into the router and switch. Upon running wireshark, I see EF dropping before it gets to the VOIP server. Do I need to implement an inbound policy?


Here is my outbound policy:

class-map match-any voice-signaling

match ip dscp cs3

match protocol sip

class-map match-any video-traffic

match ip dscp af41

match ip dscp af42

match ip dscp af43

class-map match-any voice-media

match ip dscp ef

match protocol rtp

class-map match-any mission-critical

match ip dscp af31

match ip dscp af32

match ip dscp af33

class-map match-any routing

match ip dscp cs6 class-map match-any voice-signaling
match ip dscp cs3
match protocol sip
class-map match-any video-traffic
match ip dscp af41
match ip dscp af42
match ip dscp af43
class-map match-any voice-media
match ip dscp ef
match protocol rtp
class-map match-any mission-critical
match ip dscp af31
match ip dscp af32
match ip dscp af33
class-map match-any routing
match ip dscp cs6

policy-map qos-policy

class voice-media

    priority percent 20

  set ip dscp ef

class video-traffic

    priority percent 25

  set ip dscp af41

class routing

  set ip dscp cs6

    bandwidth remaining percent 5

class voice-signaling

    priority percent 5

  set ip dscp cs3

class mission-critical

  set ip dscp af32

    bandwidth remaining percent 10

policy-map qos-policy

class voice-media

    priority percent 20

  set ip dscp ef

class video-traffic

    priority percent 25

  set ip dscp af41

class routing

  set ip dscp cs6

    bandwidth remaining percent 5

class voice-signaling

    priority percent 5

  set ip dscp cs3

class mission-critical

  set ip dscp af32

    bandwidth remaining percent 10

Everyone's tags (6)
566
Views
0
Helpful
0
Replies