Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Question regarding SIP-600 (is it hotplug)

Dear Netpro,

Wondering if anyone has installed the SIP-600 in a 7600 chassis (Cisco 7600 SIP 600 with 10-Port Gigabit Ethernet SPA). Is it able to be installed whilst the 7600 router is running (i.e. hotplug) or does the 7600 need to be shut down prior to installation (cold).

Any other gotcha's I should be aware of would be helpful.

Thanks in advance for your assistance.

I always rate helpful posts.

Best regards Adrian.

4 REPLIES
Hall of Fame Super Gold

Re: Question regarding SIP-600 (is it hotplug)

Yes, like all the other 7600 linecards, the SIP-600 supports OIR.

Hope this helps, please rate post if it does!

New Member

Re: Question regarding SIP-600 (is it hotplug)

Hi Paolo,

Appreciate you coming back to me so quickly, and your advice.

One more small question (I hope!);

Should I insert the SIP-600 with the SPA-1XTENGE-XFP installed (as a single unit), or insert the SIP first, then the SPA afterwards (i.e. once the SIP-600 is live).

Thanks again.

Best regards, Adrian.

Hall of Fame Super Gold

Re: Question regarding SIP-600 (is it hotplug)

Please insert the SIP with the SPA already seated. In fact, I'm not quite suire that OIR at SPA level is supported.

Thanks for the nice rating and good luck!

Hall of Fame Super Gold

Re: Question regarding SIP-600 (is it hotplug)

Reading some docs it appears that even SPA alone support OIR.

140
Views
9
Helpful
4
Replies