Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Webcast- Automate Nexus9k

Community Member

Questions about Redistribution (EIGRP and BGP)

I'm trying to figure out if there are any issues redistributing default route from EIGRP to BGP out a serial interface and then also receiving default route in same serial interface via BGP and redistributing back into EIGRP. Using different metric/Administrative distances. Seems like I read somewhere that when redistributing you should not advertise the same route into X if the same route originated from X.

3 REPLIES
Hall of Fame Super Silver

Re: Questions about Redistribution (EIGRP and BGP)

Hello Deanna,

may you explain more clearly what are you going to do ?

Usually you should identify a core protocol and an edge protocol and only the edge protocol needs a default route towards the center.

Hope to help

Giuseppe

Community Member

Re: Questions about Redistribution (EIGRP and BGP)

I would suggest injecting routes into one protocol and have a static default set on the other router.

Highlighted
Community Member

Re: Questions about Redistribution (EIGRP and BGP)

I finally arrived at the conclusion that I need to apply a floating static default route. But thank you for your comments.

115
Views
0
Helpful
3
Replies
CreatePlease to create content