IOS Configuration Note: With Cisco IOS 12.2(13)T and later codes (higher numbered T-train codes, 12.3 and later codes) the configured IPSEC "crypto map" only needs to be applied to the physical interface and is no longer required to be applied on the GRE tunnel interface. Having the "crypto map" on the physical and tunnel interface when using the 12.2.(13)T and later codes still works. However, it is highly recommended to apply it just on the physical interface.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...