Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Quick Question Regarding Software on a 7206VXR

Anyone know the difference between                   

The 'p' software

Like

c7200p-fpd-pkg.124-24.T7.pkg

c7200p-kboot-mz.124-24.T7.bin

c7200p-advipservicesk9-mz.124-24.T7.bin

and the software without the 'p'

c7200-boot-mz.124-24.T7.bin

c7200-kboot-mz.124-24.T7.bin

c7200-fpd-pkg.124-24.T7.pkg

It seems ours runs without the 'p' but I dont know if I should attempt to install the 'p' version.

Any Help Appreciated

James

Everyone's tags (2)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Quick Question Regarding Software on a 7206VXR

Hi James,

I believe that the 'p' versions are intended for NPE-G2 versions of the 7200 router. If you don't have NPE-G2 in your 7200 router you probably should not try to run the 'p' version.

Do you known the Cisco Feature Navigator tool? It's a great tool to use in these cases. Visit http://cisco.com/go/fn

Best regards,

Peter

Super Bronze

Quick Question Regarding Software on a 7206VXR

Disclaimer


The   Author of this posting offers the information contained within this   posting without consideration and with the reader's understanding that   there's no implied or expressed suitability or fitness for any purpose.   Information provided is for informational purposes only and should not   be construed as rendering professional advice of any kind. Usage of  this  posting's information is solely at reader's own risk.

Liability Disclaimer

In   no event shall Author be liable for any damages whatsoever (including,   without limitation, damages for loss of use, data or profit) arising  out  of the use or inability to use the posting's information even if  Author  has been advised of the possibility of such damage.

Posting

only NPE G2 routers use 7200p image to boot.

NB: Also includes the 7201 (but not the 7301), I believe.

5 REPLIES
Cisco Employee

Quick Question Regarding Software on a 7206VXR

Hi James,

I believe that the 'p' versions are intended for NPE-G2 versions of the 7200 router. If you don't have NPE-G2 in your 7200 router you probably should not try to run the 'p' version.

Do you known the Cisco Feature Navigator tool? It's a great tool to use in these cases. Visit http://cisco.com/go/fn

Best regards,

Peter

New Member

Quick Question Regarding Software on a 7206VXR

I have the NPE-G2 so I will order the 'p' versions

Thanks for the info

James

Cisco Employee

Quick Question Regarding Software on a 7206VXR

P as others discussed refers for NPE network processing engine -2 ie G2 which is a processor at the back of 7200

few images which are without p for 7200 router usually have G1(similar to G2 ) NPE -300,400 etc.

only NPE G2 routers use 7200p image to boot.

Super Bronze

Quick Question Regarding Software on a 7206VXR

Disclaimer


The   Author of this posting offers the information contained within this   posting without consideration and with the reader's understanding that   there's no implied or expressed suitability or fitness for any purpose.   Information provided is for informational purposes only and should not   be construed as rendering professional advice of any kind. Usage of  this  posting's information is solely at reader's own risk.

Liability Disclaimer

In   no event shall Author be liable for any damages whatsoever (including,   without limitation, damages for loss of use, data or profit) arising  out  of the use or inability to use the posting's information even if  Author  has been advised of the possibility of such damage.

Posting

only NPE G2 routers use 7200p image to boot.

NB: Also includes the 7201 (but not the 7301), I believe.

Cisco Employee

Quick Question Regarding Software on a 7206VXR

Hello Joseph,

NB: Also includes the 7201 (but not the 7301), I believe.

Correct - the Feature Navigator claims the same.

Best regards,

Peter

325
Views
0
Helpful
5
Replies