Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

"Sh ppp multi int multi X" output

Could someone please let me know if "unassigned" fragments indicate an issue on a multilink ?

See output below:

Multilink9, bundle name is XXX

  Bundle up for 1d12h
  0 lost fragments, 2861459 reordered, 23 unassigned
  0 discarded, 0 lost received, 2/255 load
  0x60AF3B received sequence, 0x9E46A7 sent sequence
  Member links: 4 active, 0 inactive (max not set, min not set)
    Se2/0/17:1, since 1d12h, last rcvd seq 60AF40
    Se2/0/18:1, since 1d12h, last rcvd seq 60AF65
    Se2/0/16:1, since 1d12h, last rcvd seq 60AF62
    Se2/0/4:1, since 1d12h, last rcvd seq 60AF37

Thank you.


Lynne

5 REPLIES

Re: "Sh ppp multi int multi X" output

I don't have that problem with my multilinks, but I've disabled fragmentation. Are you having an issue with the link?

HTH,

John

HTH, John *** Please rate all useful posts ***
New Member

Re: "Sh ppp multi int multi X" output

Hi John,

I am trying to figure out if we are having an issue or not. I have a customer complaining of latency to an app.  I can see the sporadically high ping times and hops in a traceroute though those can be false positive.  All the circuits are running clean and nothing is being dropped.  The only thing I saw that seemed odd is the "unassigned" fragments in the output in the post. I dont know if I should be concerned about them or not.  I searched for a while on google and could not find out anything one way or another.


Thanks


Lynne

Re: "Sh ppp multi int multi X" output

Can you post the config of that interface and the interface that's bonded to it? Take out public addressing and things....

John

HTH, John *** Please rate all useful posts ***
New Member

Re: "Sh ppp multi int multi X" output


interface Multilink9
description to -
ip vrf forwarding XX
ip address x.x.x.x 255.255.255.252
ip flow ingress
no cdp enable
ppp multilink
no ppp multilink fragmentation
multilink-group 9
no clns route-cache
end

sh run int Se2/0/18:1
Building configuration...

Current configuration : 235 bytes
!
interface Serial2/0/18:1
description T-1 to -
bandwidth 1544
no ip address
ip flow ingress
encapsulation ppp
ppp multilink
multilink-group 9
no clns route-cache
end

sh run int Se2/0/17:1
Building configuration...

Current configuration : 235 bytes
!
interface Serial2/0/17:1
description T-1 -
bandwidth 1544
no ip address
ip flow ingress
encapsulation ppp
ppp multilink
multilink-group 9
no clns route-cache
end

sh run int Se2/0/16:1
Building configuration...

Current configuration : 235 bytes
!
interface Serial2/0/16:1
description T-1 to-
bandwidth 1544
no ip address
ip flow ingress
encapsulation ppp
ppp multilink
multilink-group 9
no clns route-cache
end

sh run int Se2/0/4:1
Building configuration...

Current configuration : 222 bytes
!
interface Serial2/0/4:1
description T-1 to
bandwidth 1544
no ip address
ip flow ingress
encapsulation ppp
ppp multilink
multilink-group 9
no clns route-cache
end

here you go.

Hall of Fame Super Silver

Re: "Sh ppp multi int multi X" output

Hello Lynne,

I didn't find an explanation for the field in command reference

http://www.cisco.com/en/US/docs/ios/dial/command/reference/dia_s3.html#wp1056146

However, because all other counters are 0 you should be fine:

0 lost fragments, 2861459 reordered, 23 unassigned
  0 discarded, 0 lost received, 2/255 load

Hope to help

Giuseppe

226
Views
0
Helpful
5
Replies
CreatePlease login to create content