Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Radius configuration on Nexus 7k

Has anyone experienced configuring radius authentication on Nexus 7k?

Any issues with it. I have heard once you have configured the radius you are only able to run show commands on it.

Can anyone please paste the sample configuration in used by someone.

Thanks.

Regards,

Everyone's tags (5)
3 REPLIES
Community Member

Radius configuration on Nexus 7k

Radius Server is Steel Belted V 6.X

Community Member

Radius configuration on Nexus 7k

Hi,

I have the same issue with Nexus100v. As a user i can successfully authenticate however the level of privilidges is pretty much restricted to ping and traces. We are using Windows Server 2003r2, my same user and password are fine for Catalyst based switches. Configuration as follows, any help would be greatly appreciated.

aaa authentication login console group radius local

!

aaa group server RadServer

server 172.a.b.c

use vrf management

source-interface mgmt0

!

radius-server host 172.a.b.c key XXXXXX authentication

Regards

Darren

Community Member

I had the same issue. The

I had the same issue. The issue is with your Radius authentication server. IT needs to pass back to the Cisco device the login level. check out this article. It helped me fix my issue.

http://blog.skufel.net/2012/06/how-to-integrating-cisco-devices-access-with-microsoft-npsradius/

552
Views
0
Helpful
3
Replies
CreatePlease to create content