Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

rate limit is running here or not rate limit is running here or not rate li

dears,

i have my billing system (Centile) i put at Billing this command :

lcp:interface-config=rate-limit output access-group 101 1024000 1 6000 512000 conform-action transmit exceed-action drop

and i get the following:

Feb 19 06:23:11.270: VT[Vi7]:Added new AAA cloneblk, now cloning from vtemplate/AAA

*Feb 19 06:23:11.270: VT[Vi7]:Clone Vaccess from AAA (131 bytes)

*Feb 19 06:23:11.270: VT[Vi7]:ip tcp header-compression

*Feb 19 06:23:11.274: VT[Vi7]:rate-limit output access-group 101 1024000 1 6000 512000 conform-action transmit exceed-action drop

*Feb 19 06:23:11.274: VT[Vi7]:end

*Feb 19 06:23:11.274: VT[Vi7]:Applying config commands on process "VTEMPLATE Background Mgr" (135)

*Feb 19 06:23:11.274: VT[Vi7]:ip tcp header-compression

*Feb 19 06:23:11.274: VT[Vi7]:rate-limit output access-group 101 1024000 1 6000 512000 conform-action transmit exceed-action drop

*Feb 19 06:23:11.274: VT[Vi7]:end

*Feb 19 06:23:11.278: VT:Messages from (un)cloning Vi7:

rate-limit output access-group 101 1024000 1 6000 512000 conform-action transmit

*Feb 19 06:23:11.278: VT:Messages from (un)cloning Vi7:

^ exceed-action drop

*Feb 19 06:19:48.990: VT:Messages from (un)cloning Vi15:

*Feb 19 06:19:49.002: AAA/ATTR(00013CD5): del attr: 63A5AA94 0 00000009 interface-config(153) 99 rate-limit output access-group 101 1024000 1 6000 512000 conform-action transmit e

*Feb 19 06:21:13.714: RADIUS: Cisco AVpair [1] 122 "lcp:interface-config=rate-limit output access-group 101 1024000 1 6000 512000 conform-action transmit exceed-action drop"

*Feb 19 06:21:13.714: RADIUS: Session-Timeout [27] 6 43200

*Feb 19 06:21:13.714: AAA/ATTR(00013CDE): free all lists: 0x63A5A9F0

*Feb 19 06:21:13.714: AAA/ATTR(00013CDE): del attr: 63A5AA08 0 00000002 Framed-Protocol(62) 4 PPP

*Feb 19 06:21:13.714: AAA/ATTR(00013CDE): del attr: 63A5AA1C 0 00000009 username(318) 17 moread@tarasol.jo

*Feb 19 06:21:13.714: AAA/ATTR(00013CDE): del attr: 63A5AA30 0 00000009 password(226) 4 34 39 30 38

*Feb 19 06:21:13.714: AAA/ATTR(00013CDE): new list: 0x63A5A9F0

*Feb 19 06:21:13.714: RADIUS(00013CDE): Received from id 1645/67

*Feb 19 06:21:13.714: AAA/ATTR(00013CDE): cursor init: 63E85BF8 63A5A9F0 none none

*Feb 19 06:21:13.714: AAA/ATTR(00000000): add attr: 63A5AA08 0 00000001 service-type(245) 4 Framed

*Feb 19 06:21:13.714: AAA/ATTR(00000000): add attr: 63A5AA1C 0 00000001 Framed-Protocol(62) 4 PPP

*Feb 19 06:21:13.714: AAA/ATTR(00000000): add attr: 63A5AA30 0 00000001 addr(5) 4 255.255.255.254

*Feb 19 06:21:13.714: AAA/ATTR(00000000): add attr: 63A5AA44 0 00000001 netmask(215) 4 255.255.255.255

*Feb 19 06:21:13.714: AAA/ATTR(00000000): add attr: 63A5AA58 0 00000001 routing(281) 4 FALSE

*Feb 19 06:21:13.714: AAA/ATTR(00000000): add attr: 63A5AA6C 0 00000001 Framed-MTU(63) 4 1500(5DC)

*Feb 19 06:21:13.714: AAA/ATTR(00000000): add attr: 63A5AA80 0 00000001 link-compression(192) 4 vj

*Feb 19 06:21:13.718: AAA/ATTR(00000000): add attr: 63A5AA94 0 00000009 interface-config(153) 99 rate-limit output access-group 101 1024000 1 6000 512000 conform-action transmit e

*Feb 19 06:21:13.718: AAA/ATTR(00000000): add attr: 63A5AAA8 0 00000001 timeout(303) 4 43200(A8C0)

i need to know if this command is running well and if not any help please?

BR.

1 REPLY
Silver

Re: rate limit is running here or not rate limit is running here

It may be memory related problem better you reload the device so all the memory will return

130
Views
0
Helpful
1
Replies