Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Re: Forwading Rate and Backplane Speed ...

Hi,

[1] I would like to know if the forwarding rate on a device is the amount of packets it can handle in a second ?

[2] What is the backplane speed and how is it related to the forwading rate ?

Thank you,

Cheers,

- sn -

3 REPLIES
New Member

Re: Re: Forwading Rate and Backplane Speed ...

I would recommend reviewing the documents from the IETF Benchmarking Working Group. They provide test terminology and methodology RFCs.

http://www.ietf.org/html.charters/bmwg-charter.html

Here is an example of one of the RFCs they have developed for lan switching devices:

http://www.ietf.org/rfc/rfc2285.txt

Steve Lyons - Cisco

Super Bronze

Re: Re: Forwading Rate and Backplane Speed ...

"[1] I would like to know if the forwarding rate on a device is the amount of packets it can handle in a second ? "

It is. Usually measured as packets per second (pps). To be meaningful, packet size needs to be noted. Rates often quoted for 64 byte Ethernet packets.

As packet size increases pps rate drops for the same effective bandwidth.

Device pps performance can often vary depending what device is configured to do and what's the actual traffic transiting the device. For instance, ACLs may decrease pps rate.

If input rate is higher than device can forward, packets might be queued and later forwarded and/or dropped.

"[2] What is the backplane speed and how is it related to the forwading rate ? "

Backplane speed is the bandwidth available to move traffic through the device. Measured in bits per second (bps). As noted above, pps rate can vary, based on packet size, but will use same bandwidth.

For example,

for 10 Mbps Ethernet

64 byte packets require 14,881 pps

1518 byte packets require 813 pps

If there's insufficient backplane bandwidth, packets will be queued and/or dropped.

PS:

Backplanes can be of different architectures which can greatly impact traffic transiting the device.

New Member

Re: Re: Forwading Rate and Backplane Speed ...

Jose,

Thanks for the post. It is clearer to me know ....:)

Cheers mate,

- sn -

122
Views
5
Helpful
3
Replies
CreatePlease login to create content