Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Re : Help in configuring VWIC2-2MFT-G703 ...

Hi,

I have a VWIC2-2MFT-G703 (2-Port T1/E1 Voice / WAN w/ D&I & unstructured E1 ) and need to configure this. Can someone tell me :-

1) how do I see this card on my 3825 router ? Coz I am not seeinng this card when I have put it in my router ...

2) how do I configure this card ...

thank you,

Cheers,

- Internetb -

2 REPLIES
Community Member

Re: Re : Help in configuring VWIC2-2MFT-G703 ...

1) how do I see this card on my 3825 router ? Coz I am not seeinng this card when I have put it in my router ...

You have to define the type of circuit with the slot number of the card for example.

controller E1 0/0/0

Then you can specity it's framing and channel-group such as:

framing NO-CRC4

channel-group 0 timeslots 1-31

2) how do I configure this card ...

That depends on the way the circuit was provisioned. T1, E1 framing etc etc.

Hall of Fame Super Gold

Re: Re : Help in configuring VWIC2-2MFT-G703 ...

Internetb

The essential first step is to tell the router how you want to use the card (since it can support both T1 and E1). Use the command: card type T1/E1 and identify the slot that the card is in. Then the suggestions from Donald will be available.

HTH

Rick

132
Views
10
Helpful
2
Replies
CreatePlease to create content