Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

reboat on rommon mod

hi Experts,

each time i restart my 2811 router it's drive me to the rommon mod and i have to select boot from flash i intered boot system command and it's shown as followed

!

boot-start-marker

boot system flash:c2800nm-ipbase-mz.124-11.T.bin

boot-end-marker

!

6 REPLIES

Re: reboat on rommon mod

Hi Mohamed,

can you please paste the show version and dir flash:

HTH,

Mohammed Mahmoud.

New Member

Re: reboat on rommon mod

Cisco IOS Software, 2800 Software (C2800NM-IPBASE-M), Version 12.4(11)T, RELEASE

SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2006 by Cisco Systems, Inc.

Compiled Sat 18-Nov-06 17:16 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

Wasla uptime is 1 hour, 23 minutes

System returned to ROM by reload at 10:24:21 UTC Sun Aug 12 2007

System image file is "flash:c2800nm-ipbase-mz.124-11.T.bin"

Cisco 2811 (revision 53.50) with 249856K/12288K bytes of memory.

Processor board ID FCZ111570E5

2 FastEthernet interfaces

4 Serial(sync/async) interfaces

2 Channelized E1/PRI ports

DRAM configuration is 64 bits wide with parity enabled.

239K bytes of non-volatile configuration memory.

62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x3920

New Member

Re: reboat on rommon mod

ompactFlash directory:

File Length Name/status

1 19656184 c2800nm-ipbase-mz.124-11.T.bin

[19656248 bytes used, 44569028 available, 64225276 total]

62720K bytes of ATA CompactFlash (Read/Write)

Re: reboat on rommon mod

hi Mohamed,

Please change the Configuration register to 0x2102 via the config-register command and reload the router .

HTH,

Mohammed Mahmoud.

New Member

Re: reboat on rommon mod

great it's work....

how can i get back the SDM as it's erased from the flash:

(i don't have cco password to download it)

Re: reboat on rommon mod

Hi,

For SDM, you'll require a regular cco account (the guest one you are posting your questions with right now):

http://www.cisco.com/pcgi-bin/tablebuild.pl/sdm

Downloading and Installing Cisco Router and Security Device Manager

http://www.cisco.com/en/US/products/sw/secursw/ps5318/prod_installation_guide09186a00803e4727.html

HTH,

Mohammed Mahmoud.

171
Views
5
Helpful
6
Replies
CreatePlease to create content