Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Recommendation Central Ethernet Aggregation Router >30 Ports

Hello,

i want to aggregate the following L3 Ethernet Fibrelinks in a central site. It´s planned to use BGP an Routing Protocol:

13 x 1 Gbit

10 x 100Mbit

  3 x 10 Mbit

7x 10 Mbit (Backup links, with only 2 Mbit bandwidth)

1-2 10Gbit

That central site will be connected over 2 fibres to two Routers at the main Datacentre. (At the moment, it is planned one 10G link as Primary and one 1G Link as Backup)

What would be your recommendation for this Setup? Would be a Catalyst 4507R a good starting point or would it be possible to use two stacked 3850?

Everyone's tags (3)
2 REPLIES
Hall of Fame Super Gold

Recommendation Central Ethernet Aggregation Router >30 Ports

I have deleted my 100% correct answer due to low rating unfairly received, and will refrain from further participating. Good luck.

Re:Recommendation Central Ethernet Aggregation Router >30 Ports

3750x, 3850, or 4500 will all work. Which one is best comes down to your budget and number of fiber ports / copper ports.

Regards,
Mike


Sent from Cisco Technical Support Android App

274
Views
0
Helpful
2
Replies