Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Recover Router

Hello,

I have 2811 series router running IP base IOS, later I added VOICE supporting IOS and reload the router.

now the router doesnt boot ; just freezes

Please let me know the steps to restore the router in working mode?? Will I lose my configuration on the router.

Details of router

Cisco 2811 (revision 53.50) with 251904K/10240K bytes of memory

flash:c2800nm-ipbase-mz.124-3d.bin

239K bytes of non-volatile configuration memory.

62720K bytes of ATA CompactFlash (Read/Write)

3 REPLIES

Re: Recover Router

Hi there,

Have you removed the old IOS (IP Base), after add the new Voice IOS ?

BR,

Mohammed Mahmoud.

New Member

Re: Recover Router

I cannot get the prompt to delete

What steps are required?

Re: Recover Router

Hi,

Thanks God you didn't remove it.

First: reload the router and do a break sequence to enter rommon mode:

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080174a34.shtml

Second: dir your flash to get the old IP-Base IOS exact name:

http://www.cisco.com/en/US/products/ps5854/prod_configuration_guide09186a00802c35e9.html#wp1066200

Third: boot the router using the old IP-Base image:

http://www.cisco.com/en/US/products/ps5854/prod_configuration_guide09186a00802c35e9.html#wp1064046

HTH, please rate if it does help,

Mohammed Mahmoud.

172
Views
0
Helpful
3
Replies
CreatePlease login to create content