Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Redistribute issue, can not learn the full route.

ISDN is backup, running on OSPF. Currently, once i shut down the serial link, all the route learn via OSPF, I can see the ISDN is up and OSPF is establish during the test, but unable to learn all the route, feel something wrong with the configuration. Please advise.

RouterA#sh run | b router

router ospf 64

router-id 32.34.100.102

log-adjacency-changes

redistribute connected metric-type 1 subnets

redistribute static metric-type 1 subnets

network 32.38.42.160 0.0.0.31 area 0

!

router bgp 65001

no synchronization

bgp log-neighbor-changes

bgp redistribute-internal

network 32.34.100.102 mask 255.255.255.255

network 32.38.150.164 mask 255.255.255.252

neighbor EVPN_PRIMARY peer-group

neighbor EVPN_PRIMARY remote-as 21302

neighbor EVPN_PRIMARY send-community

neighbor EVPN_PRIMARY soft-reconfiguration inbound

neighbor 32.38.70.165 peer-group EVPN_PRIMARY

neighbor 32.38.70.165 description VPN_1

no auto-summary

!

address-family ipv4 vrf DEKI_VPN2

neighbor EVPN_SECONDARY peer-group

neighbor EVPN_SECONDARY remote-as 21302

neighbor EVPN_SECONDARY activate

neighbor EVPN_SECONDARY send-community

neighbor EVPN_SECONDARY soft-reconfiguration inbound

neighbor 32.38.33.13 peer-group EVPN_SECONDARY

neighbor 32.38.33.13 description VPN_2

neighbor 32.38.150.177 remote-as 65010

neighbor 32.38.150.177 description to DEDEKIHAN0002R

neighbor 32.38.150.177 activate

neighbor 32.38.150.177 next-hop-self

neighbor 32.38.150.177 soft-reconfiguration inbound

no auto-summary

no synchronization

bgp redistribute-internal

network 32.37.133.247 mask 255.255.255.255

network 32.38.54.12 mask 255.255.255.252

network 32.38.25.176 mask 255.255.255.252

network 155.0.15.0

exit-address-family

Thank you,

1 REPLY
Cisco Employee

Re: Redistribute issue, can not learn the full route.

Are you saying you learn some routes, but not all routes? We'll need much more information than this. You'll need to provide:

show ip route x.x.x.x on side that has the route

show ip route x.x.x.x on side that has no route

show ip ospf neigh

show ip ospf data for route that is not present

90
Views
0
Helpful
1
Replies
CreatePlease login to create content