07-19-2013 02:46 AM - edited 03-04-2019 08:29 PM
Hello,
I will have the possible task of joining our EIGRP network to another one and they are on different AS numbers. I'm going to use GNS3 to help me plan this, but can you give me some advise on how I can redistribute their EIGRP AS into ours and visa versa? I have done basic redistribution before with RIP into EIGRP and connected subnets, but nothing this big .
Thanks
07-19-2013 03:00 AM
Hi,
do mutual redistribution on one router running both processes:
router eigrp 1
redistribute eigrp 2 metric x x x x x
router eigrp 2
redistribute eigrp 1 metric x x x x x
Regards
Alain
Don't forget to rate helpful posts.
07-19-2013 03:11 AM
you can collect the metric values in interfaces using below command.
Sh interfaces
07-19-2013 03:18 AM
Is this to get their current metrics?
07-19-2013 03:36 AM
yes.. You can type show interface and specify the interface you need to know the metric values..
07-19-2013 03:18 AM
Thanks as always Alain, I will give it a try.
07-19-2013 03:37 AM
can we use this command
router eigrp 1
redistribute eigrp 2 metric-type 1 subnets
router eigrp 2
redistribute eigrp 1 metric-type 1 subnets.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide