Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Redistribution static route external type 1 into OSPf issue

Hello Expert

How can I do in order to both my 2 x N7KS learnt 10.226.80.0 route  external type E1  via the same vlan 97.
FY, this route is inside the ospf database in both devices.


 Type-5 AS External Link States 
 
Link ID         ADV Router      Age        Seq#       Checksum Tag
10.226.80.0     10.226.0.1      40         0x80007fc9 0x1c37    10

For N7K1, it's ok , any issue see below
N7K1# sh ip route
 
10.226.80.0/24, ubest/mbest: 1/0
    *via 10.255.254.3, Vlan97, [110/200], 3w0d, ospf-OSPF, type-1, tag 10
 but for the N7K2, the route was learnt vi other vlan   vlan 601, see below
# sh ip route 10.226.80.0
 
10.226.80.0/24, ubest/mbest: 8/0
    *via 10.224.6.22, Vlan601, [110/400], 23:12:37, ospf-OSPF, type-1, tag 10
    *via 10.224.6.23, Vlan601, [110/400], 23:12:37, ospf-OSPF, type-1, tag 10
    *via 10.224.6.24, Vlan601, [110/400], 23:12:37, ospf-OSPF, type-1, tag 10
    *via 10.224.6.25, Vlan601, [110/400], 23:12:37, ospf-OSPF, type-1, tag 10
    *via 10.224.6.27, Vlan601, [110/400], 23:12:37, ospf-OSPF, type-1, tag 10
    *via 10.224.6.29, Vlan601, [110/400], 23:12:37, ospf-OSPF, type-1, tag 10


  Question,

 I'd like  the route  via the same vlan, vlan97 as the first device.

thx
Alioune
   

1 REPLY
New Member

hi, could you share "show ip

hi, 

could you share "show ip ospf border-routers" information. you could redistribute this route on the ASBR device.

54
Views
0
Helpful
1
Replies
CreatePlease login to create content