im trying to configure redundancy between 2 interfaces on the same router
in one port its' point to point and the other one its ADSL dialer how can i do it
right now its a static route 0.0.0.0 to the dialler and i configured metric 10 for the dialer and metric 20 for the point to point connection ...
if someone can tell me how to do it and also how to do it the other way when the 0.0.0.0 is for the point to point and the backup is the dialer because there is the problem when the interface is still up but the other side is not responding the Cisco wouldnt know ...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.