cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
235
Views
0
Helpful
1
Replies

redundant link

z.belaziz
Level 1
Level 1

HI,

As shown in the schema i need to configure my Switch L3 to track the state of both serial links (Lised Line and X25) in order to join the remote site with LAN 10.10.0.0 /16.

my primary link is Lised Line

my backup link is X25

need help

1 Reply 1

wochanda
Level 4
Level 4

You cant use the 3550 to track the state of the Serial links, but you can configure the 3800's to share an IP address on the segment to the switch so that only the one with a working serial connection handles the traffic. The feature is HSRP:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr_c/ipcprt1/1cfip.htm#wp1001531

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco