One of my customer is having head office (cisco 3660)b and branches having (cisco 1721 routers) for data transfer and now its working fine and he was connected his router ethernet on sinle 8 port un managed switch and also
he was having cisco pix 515E for internet all the remote branches r accessing the internet through this pix that ethernet also connected on 8 port unmanaged switch .
Now they r taken MPLS lines as back up lines for head office to branch office connectivity .Now the problem is they r terminating this mpls on saparate router (cisco1750) and router o/p is connected to pix 515E now through this pix they r able to pig remote router using mpls line but they r unable to access his servers and lan
ip scem is:---
mpls ethernet ip:10.14.7.78
they want to access his lan through the firewall how can achive this
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...