Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Reg:fxo to fxs

Dear sir,

We have point to multipoint application connected via FHDMA wireless radio.in head office and branche office having 2800 routers having fxo and fxs cords.

In headoffice 2801 having 2 port fxo cord we connected 1 analog pone and remote having 2801 router having fxs cord we connected analog phone to fxs port.

Now we want communicate head office to all remote brances and all remote branches has to communicate head office.

how can i configure the router plz give some example.

Thanks&Regards

srini

2 REPLIES

Re: Reg:fxo to fxs

Hey Srini,

You are same srini who used to come to pho right?

This issue is still going on man?

-> Sushil

Re: Reg:fxo to fxs

Hi Srini,

As far as I understand the FXS card needs to be connected to the Analog Phone and the FXO card can be connected to either PBX or PSTN not to any analog phones.

Please let us understand if it is so.

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b53c7.shtml

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a0080094fac.shtml

Please rate if it helps,

Kind Regards,

Wilson Samuel

100
Views
3
Helpful
2
Replies