reg:isp failover

[vasuramnet]

Dear sir,

My customer is having 2 isps one is from B.T(british telecom)&Primus

he wants to terminate these 2 isps in one router and he wants isp failover.

and primus he was having 2mbps out of this 2mb he want to segrigate 1 mb

for data and 1 mb for voice and he want loadbalancing also.

Regards

srinivas

[irisrios]

I think you can use BGP on your router to provide failover and loadbalancing. You can use QoS to segregate your bandwidth for voice and data. Following links may help you

http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a008009456d.shtml

http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_configuration_guide_chapter09186a008007ff07.html

[paolo bevilacqua]

Please see this thread for a discussion about ISP load balancing using NAT instead of BGP appliances. Note that especially in europe, requirement to be assigned an AS number are way beyond typical business profile.

Hope this helps, please rate post if it does!