In site to site VPN,we have configured authentication ,encryption and applied over the data.If we know both end IP address,we assigned set peer cmd.If the interface are configured with DHCP(ISP),We don't know the interface IP address.At this scenario,how to configure site to site vpn.In remote VPN,how to configure remote VPN in cisco router.How to provide IP address dynamically to client host.kindly provide solution for this.
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Don't know if it can be used with a single site-to-site VPN, but DMVPN can use NHRP to support non-hub with dynamic tunnel IPs. The client is configured with a hub's IP, and it uses NHRP to register its public IP with the hub. The hub then "knows" the remote IP. (NB: it also supports the remote IP being changed.)
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.