Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Regarding Switching issue

I have 26 siwtches in production network.im facing issue with 1PC that connectedinthe netowrk .My question is what are command and prcoedure to check the issue.

2)Above same network 1PC connected to the network unable acces the internet .

5 REPLIES
Gold

Regarding Switching issue

Hi Praveen,

You should start checking if the PC is getting the ip address. IF there is no ip address verify the switch port is configured with correct VLAN. If the ip address is fine try pinging the default gateway from this PC and verify if this works well. If that is fine most likely this would a DNS issue. Try pining google.com or cisco.com and verify if you are able to get a responce for ping. May be you could try setting the DNS as 4.2.2.2 0 or 8.8.8.8.

Hope that helps

Regards

Najaf

Cisco Employee

great discussion

great discussion

Testing adding attachments

Testing adding attachments
New Member

this is a test reply

this is a test reply
New Member

If it's only 1 pc, try a

If it's only 1 pc, try a different switch port, and don't forget the obvious stuff like the physical layer. Factory cables or did you make them yourself?

100
Views
0
Helpful
5
Replies