Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Reliable Policy Routing on a CAT 4506?

Hello,

I need to send all my voip traffic using a single ISP router (bgp peer). We'll be load balancing to 4 peers on the same AS.

Connection are done via fastethernet, our core 4506 connects to a layer 2 device and then to the ISP peers (all ethernet).

My first suggestion would be PBR with object tracking, but this is not supported on the 4506.

Is there a way to make this policy routing reliable?

As "set ip next-hop IP1 IP2" wouldnt be that effective, as the interface would need to go down before trying a different IP.

Please let me know,

Vlad

1 REPLY
Silver

Re: Reliable Policy Routing on a CAT 4506?

Cisco IOS Release 12.1(14)E1 for the Catalyst 4000 family switch does not support following features

Jumbo frames

IGMP v3 snooping

DLSw (Data-link switching)

WCCP (Web Cache Communication Protocol)

IEEE 802.3ad

PBR (policy-based routing)

VLAN Management Policy Server (VMPS) client or server Remote SPAN (RSPAN)

Port security

http://www.cisco.com/en/US/products/hw/switches/ps4324/products_configuration_guide_chapter09186a00801a15d3.html

132
Views
0
Helpful
1
Replies