Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

remove Cisco's banner

How can I remove Cisco's banner from 2811 router?

banner login ^C

-----------------------------------------------------------------------

Cisco Router and Security Device Manager (SDM) is installed on this device.

This feature requires the one-time use of the username "cisco"

with the password "cisco". The default username and password have a privilege le

vel of 15.

Please change these publicly known initial credentials using SDM or the IOS CLI.

Here are the Cisco IOS commands.

username <myuser> privilege 15 secret 0 <mypassword>

no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use

.

For more information about SDM please follow the instructions in the QUICK START

GUIDE for your router or go to http://www.cisco.com/go/sdm

-----------------------------------------------------------------------

^C

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: remove Cisco's banner

From the router prompt

router#

go into config mode

router#config t

and type no banner login

router(cnfg)#no banner login

HTH,

1 REPLY
Hall of Fame Super Bronze

Re: remove Cisco's banner

From the router prompt

router#

go into config mode

router#config t

and type no banner login

router(cnfg)#no banner login

HTH,

6735
Views
0
Helpful
1
Replies
CreatePlease to create content