Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Removing wrr config from Cisco 6504-E Switches

I want to remove wrr configurations from Cisco 6504-E switches but I've read somewhere that if you remove it from one port in the ASIC it may remove it from the others!
So, my question is if I just remove it from one port, will it automatically remove it from the other ports or I have to remove it from each port individually? I want to remove all wrr configurations from all port.
Here is what I am running.

cisco WS-C6504-E (R7000) processor (revision 2.0)
Cisco IOS Software, s3223_rp Software (s3223_rp-IPSERVICESK9_WAN-M), Version 12.2(33)SXH4, RELEASE SOFTWARE (fc1)

1    9  Supervisor Engine 32 8GE (Active)      WS-SUP32-GE-3B     SAL11413BH0
3   48  48 port 10/100/1000mb EtherModule      WS-X6148-GE-TX     SAL1138125A


I would appreciate any help in this matter.

Thank You.

Kazi

38
Views
0
Helpful
0
Replies