Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Replace non-PoE Power supply in 2811 with PWR-2811-AC-IP=?

I have a customer with the standard AC power supply in a 2811. Can I simply order the spare PWR-2811-AC-IP= so that I can get PoE in the chassis and swap the power supplies? I want to make sure that I have all of the system board connections and cables necessary to do this. Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Replace non-PoE Power supply in 2811 with PWR-2811-AC-IP=?

I've done this and is very straightforward. The part will contain everything you need including a pigtail that connects -48V from the PS directly to the motherboard.

HTH!

2 REPLIES
Hall of Fame Super Gold

Re: Replace non-PoE Power supply in 2811 with PWR-2811-AC-IP=?

That will be enougn for PoE PS. Then, also some the ESW cards come in varieties with or without PoE, so you've to chekc what's installed in the router also. Use "show diag" for that.

Cisco Employee

Re: Replace non-PoE Power supply in 2811 with PWR-2811-AC-IP=?

I've done this and is very straightforward. The part will contain everything you need including a pigtail that connects -48V from the PS directly to the motherboard.

HTH!

1067
Views
0
Helpful
2
Replies
CreatePlease login to create content