Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

req: sample config wic-1am-v2 modem card

does anyone have a sample config I can look at for a cisco wic-1am-v2

dialup card doing an outgoing UK dialup? I'm in the UK, got this card fitted

inside a cisco 2651xm router, I've tried to configure it but I'm puzzled

as to how to get it to dialup to my isp. None of the modems lights have

come on - I don't know if this is a duff card or if I haven't configured

it properly.. I did find

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/gt12pwi8.html

on google but I can't get this modem card to dial out. I also found

http://fromatobtoit.co.uk/2008/04/20/cisco-modems-and-dialtone/ but

still no joy.

What commands test the modems functions?

Thanks for any pointers.

2 REPLIES
New Member

Re: req: sample config wic-1am-v2 modem card

To configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC, complete the following tasks:

•Configuring the Asynchronous Interface

•Configuring the Country Code

•Upgrading the Modem Firmware

•Verifying the Modem Firmware Upgrade

New Member

Re: req: sample config wic-1am-v2 modem card

thanks for that feedback but it's a bit basic and I'm having difficulty completing step 1. I was hoping to see someone's working sample config to help get me started.

1851
Views
1
Helpful
2
Replies