Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Reset Default Config thru CLI on 1841

I need to restore the routers default configuration and the SDM is corrupt, can you tell me how to do this thru CLI? Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Reset Default Config thru CLI on 1841

Try using command,

Copy flash:SDM_Backup startup-config

-amit singh

4 REPLIES

Re: Reset Default Config thru CLI on 1841

Hi,

Do the following:

router# erase nvram:

router#reload

HTH,

-amit singh

New Member

Re: Reset Default Config thru CLI on 1841

Hi Amit,

This did clear the config back to default, but what I really need is the default SDM configuration that is sitting in flash. How do I copy this config from flash to NVRAM?

Here is my flash directory:

Router#show flash

-#- --length-- -----date/time------ path

1 24967872 Oct 17 2006 16:46:40 +00:00 c1841-advipservicesk9-mz.124-3f.bin

2 1821 Oct 17 2006 17:01:40 +00:00 sdmconfig-18xx.cfg

3 4734464 Oct 17 2006 17:02:22 +00:00 sdm.tar

4 833024 Oct 17 2006 17:02:48 +00:00 es.tar

5 1052160 Oct 17 2006 17:03:14 +00:00 common.tar

6 1038 Oct 17 2006 17:03:36 +00:00 home.shtml

7 102400 Oct 17 2006 17:04:00 +00:00 home.tar

8 491213 Oct 17 2006 17:04:22 +00:00 128MB.sdf

9 1684577 Oct 17 2006 17:05:00 +00:00 securedesktop-ios-3.1.1.27-k9.pkg

10 398305 Oct 17 2006 17:05:32 +00:00 sslclient-win-1.1.0.154.pkg

11 14616 Dec 13 2006 20:58:22 +00:00 SDM_Backup

Hall of Fame Super Silver

Re: Reset Default Config thru CLI on 1841

Mitchell

I have not had to do this so can not speak from experience. But it looks to me like the file is flash: sdmconfig-18xx.cfg is what you need. When you erased nvram you left the router with a very empty config - including no SDM. I believe that this file from flash will have the SDM config that you need.

HTH

Rick

Re: Reset Default Config thru CLI on 1841

Try using command,

Copy flash:SDM_Backup startup-config

-amit singh

1023
Views
0
Helpful
4
Replies