Restricting access to network on 871 router via mac-address
I have Atomatic Teller Machine connected through 871 router to the MPLS WAN. I want to restrict the network access on the 871 network so that, only ATM machine is able to use the network based on the MAC Address Security. For all other unauthorized access must be prevented.
Note: I'm using static IP Address on the ATM Machine not dynamic.
Hope, someone must have done the above resrtiction. Please help...........
I have implemented the configuration which you mentioned in your post and it is working.
In oder to test the functionality. I have used a machine keeping the same IP Address and started pinging some entities (servers and printers) on the otherside of the network, for which I got timeouts replies which is expected but when the actual ATM machine is put back, whichever machines and printers I pinged from the test machine are not pingable from ATM machine as well unless you restart everything (I mean router and ATM machine).
Is there any way to flush the blocking on the router?
Note: I have tried clear arp-cache and clear memory but did not help.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.