Reverse telnet can be used to connect to any device which does not have a console port but it is connected to .. lets say a cisco router by a serial connection or by an internal port in the case of a IPS module on a cat 6500.
Reverse telnet is a feature that allows you to telnet to a Cisco device and then connect to a third device through an asynchronous serial connection; this configuration is often referred to as providing 'console server' functionality
for connected devices such as hosts and router/switches as a form of out-of-band (OOB) management. For more information on reverse telnet, consult the following documents:
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...