Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

RIB failure in sh ip bgp

All,

I am running a confed lab.....only bgp...no any igp..

on sh ip bg I find 1 rib failure...I did a sh ip bg rib and I got this:

R1_AS100#sh ip bg rib

Network                          Next Hop                      RIB-failure   RIB-NH Matches

201.199.25.160/27        201.199.25.178              Higher admin distance              n/a

R1_AS100#

!

Here's the whole sh list:

!

R1_AS100#sh ip bg

BGP table version is 14, local router ID is 10.10.100.1

Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,

r RIB-failure, S Stale  Origin codes: i - IGP, e - EGP, ? - incomplete

    Network                     Next Hop            Metric LocPrf Weight Path

*> 10.10.100.1/32              0.0.0.0                  0         32768 i

*> 10.10.130.1/32             201.199.25.178       0         500 i

*> 10.10.140.1/32             201.199.25.178                         0 500 i

*> 10.10.150.1/32             201.199.25.178           0             0 500 i

*> 130.33.255.0/27           201.199.25.178                         0 500 i

*> 140.44.255.0/26           201.199.25.178                         0 500 i

*> 150.55.255.144/28        201.199.25.178           0             0 500 i

*> 172.20.1.0/28               201.199.25.178                         0 500 ?

*> 192.168.1.0/30             201.199.25.178                         0 500 ?

*> 192.168.1.4/30             201.199.25.178           0             0 500 ?

*> 201.199.24.0/25          0.0.0.0                  0         32768 i

r> 201.199.25.160/27       201.199.25.178           0             0 500 ?

!

R1_AS100#sh ip bg rib

Network            Next Hop                      RIB-failure   RIB-NH Matches

201.199.25.160/27  201.199.25.178     Higher admin distance              n/a

!

R1_AS100#sh ip int brie

Interface                  IP-Address      OK? Method Status                Protocol

FastEthernet0/0            201.199.25.179  YES manual up                    up 

FastEthernet0/1            201.199.24.1    YES manual up                    up 

Loopback0                  10.10.100.1     YES manual up                    up 

R1_AS100#

!

What higher AD ?

!

Anyone with better explanation?

Thx.

mohamed

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions

RIB failure in sh ip bgp

Mohamed,

RIB failures like this generally indicate that it's receiving a better path by some other means. You're advertising this network from another router, but it can't put this route in the table because it has a higher administrative distance than your locally connected network.

HTH,

John

HTH, John *** Please rate all useful posts ***
3 REPLIES

RIB failure in sh ip bgp

Mohamed,

RIB failures like this generally indicate that it's receiving a better path by some other means. You're advertising this network from another router, but it can't put this route in the table because it has a higher administrative distance than your locally connected network.

HTH,

John

HTH, John *** Please rate all useful posts ***
New Member

RIB failure in sh ip bgp

John,

Thx...spot on! it's connected...it has  distance 0, metric 0

Thx again

RIB failure in sh ip bgp

Hi!

Also paste output for : show ip route 201.199.25.160 & show ip bgp 201.199.25.160

Thanks,

Nandan

1430
Views
0
Helpful
3
Replies