Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

RIP into BGP redistribution

Hi,

I have a customer sending me a /25 via RIP v2. I wish to announce this route into an EBGP connection as two /26.

How is the best way to do this?

Suggestions?

Thanks

2 REPLIES
Hall of Fame Super Silver

Re: RIP into BGP redistribution

Gareth

If you want to advertise 2 /25s then you need to have the /25s appear in your routing table. Probably the most easy way to do this would be to configure 2 /25 static routes. You can then redistribute (or configure BGP network statements) to advertise the /25s.

HTH

Rick

Purple

Re: RIP into BGP redistribution

Gareth,

You might want to try out the BGP Conditional Advertisement feature:

http://www.cisco.com/en/US/docs/ios/iproute/command/reference/irp_bgp3.html#wp1012658

Redistribute RIP into BGP, look for the existence of the /25 in the RIB, and then advertise those /26s...

Let me know how you go.

Paresh

232
Views
0
Helpful
2
Replies