Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Rip routing issue

hi friend,

My issue is we have a head office Router  at location A , and branch offices Routers  at B.C,D . The head office A has 2 smart serial cards(WIC-2T)  in which we have connected B in one card and C and D to other . Now when the Branch office router C is down or is switched off ,the Link Between A and B is also going down. But Link between A and C is always UP ,Moreover  when we shut down the link between A and C giving no encap ppp and then Swich off the router C , the between A and B remains in tact what could be the issue. Please let me know . We have configure RIP v2 on all the routers

1 REPLY
Hall of Fame Super Silver

Re: Rip routing issue

Hello Santosh,

may you provide a network diagram and configurations of the hub router?

How is the WAN connected are you using Frame Relay or you are using some form of fractional T1/E1 on the second link?

Or are you using ISDN and the two links are PRI links used for data?

>> Now when the Branch office router C is down or is switched off ,the Link Between A and B is also going down

but you said B is connected on first link alone, do you mean that C and D go down toghether or B and C go down together even if terminated in two different physical interfaces?

Hope to help

Giuseppe

137
Views
0
Helpful
1
Replies