02-06-2012 02:40 AM - edited 03-04-2019 03:09 PM
Good morning to all,
can you explain me the differences between these commands ?
Can you give me some usage examples ?
Which one do you raccomend ?
Thanks in advance.
Solved! Go to Solution.
02-06-2012 04:10 AM
Hi Luca,
There should be no difference, if you have this option. I do not have it on 12.4(24)T5.
As I see it the "ip" option was introduced to accomodate the "ipv6" option => set ipv6 next-hop.
Dan
02-06-2012 04:04 AM
Hi Luca,
The set next-hop is not available in route-map configuration in recent IOSes. It is possible that it was simply a predecessor of the current set ip next-hop command. So for Policy Based Routing using ordinary route-maps, you do not actually have any alternative, as the only command I saw available in 12.4T IOS was the set ip next-hop.
Best regards,
Peter
02-06-2012 04:10 AM
Hi Luca,
There should be no difference, if you have this option. I do not have it on 12.4(24)T5.
As I see it the "ip" option was introduced to accomodate the "ipv6" option => set ipv6 next-hop.
Dan
02-06-2012 04:18 AM
Hi Dan,
i have found it in official guide
and Cisco website too.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: