Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

Route-map with tracking

Dear Experts ,

I Put an SLA as given below to track a route-map .The SLA stat showing up , but when I do show route-map its showing   [undefined] . Is there is anything missing ?

ip sla 1
icmp-echo 192.168.111.5 source-ip 192.168.111.6
timeout 2000
frequency 5
ip sla schedule 1 life forever start-time now


route-map UPSTREAM_TRAFFIC permit 10
match ip address 104
set ip next-hop verify-availability 192.168.111.5 10 track 1
set ip default next-hop 2.2.2.2

***********************************************************8

show ip sla monitor stati

Round Trip Time (RTT) for       Index 1
        Latest RTT: 7 milliseconds
Latest operation start time: *12:07:01.571 UTC Sun Aug 15 2010
Latest operation return code: OK
Number of successes: 83
Number of failures: 0
Operation time to live: Forever

**********************************************************

show route-map

route-map UPSTREAM_TRAFFIC, permit, sequence 10
  Match clauses:
    ip address (access-lists): 104
  Set clauses:
    ip next-hop verify-availability 192.168.111.5 10 track 1  [undefined]

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Route-map with tracking

Hello Haris,

you need a configuration line that defines tracking object 1 as using ip sla 1

see

http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/dbackupx.html#wp1087990

track 1 rtr 1 reachability

where the second 1 refers to ip sla 1 object

Hope to help

Giuseppe

2 REPLIES
Hall of Fame Super Silver

Re: Route-map with tracking

Hello Haris,

you need a configuration line that defines tracking object 1 as using ip sla 1

see

http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/dbackupx.html#wp1087990

track 1 rtr 1 reachability

where the second 1 refers to ip sla 1 object

Hope to help

Giuseppe

Bronze

Re: Route-map with tracking

Hmmm,

It's a small mistake , I Put the below commands and it came up

track 1 ip sla 1

!

track 2 ip sla 2

Regards,

haris

1069
Views
0
Helpful
2
Replies