Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Route-map

whats the diff ?

route-map CONNECTED_TO_EIGRP permit 10

match interface Ethernet0/0 Ethernet0/1

and

route-map CONNECTED_TO_EIGRP permit 10

match interface Ethernet0/0

route-map permit 20

match interface Ethernet0/1

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Route-map

Hi Just,

In this context, there is no difference.

Subnets of both E0/0 and E0/1 will be redistributed into EIGRP.

You can use this solution if for example you want to assign different metrics to these connected subnets while redistributing them into EIGRP.

But why don't you put this config into a router and see it for yourself.

Cheers:

Istvan

1 REPLY

Re: Route-map

Hi Just,

In this context, there is no difference.

Subnets of both E0/0 and E0/1 will be redistributed into EIGRP.

You can use this solution if for example you want to assign different metrics to these connected subnets while redistributing them into EIGRP.

But why don't you put this config into a router and see it for yourself.

Cheers:

Istvan

95
Views
0
Helpful
1
Replies
CreatePlease to create content