02-22-2006 08:56 AM - edited 03-03-2019 11:49 AM
we encountered a problem in our network regarding the performance of a 7206 with
NPE-1G working as a route-reflector.
there is anybody who knows which are the limitations for RR design ?
we have 68 ibgp clients for it .
Solved! Go to Solution.
02-22-2006 01:02 PM
Hi,
With careful tuning, you should be able to support RR functionality on your NPE-G1. The following document describes some of the common problems experience and their solutions:
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00801c4f48.shtml
If you have further specific questions, pls do post them.
Hope that helps - pls rate the post if it does.
Paresh
02-22-2006 01:02 PM
Hi,
With careful tuning, you should be able to support RR functionality on your NPE-G1. The following document describes some of the common problems experience and their solutions:
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00801c4f48.shtml
If you have further specific questions, pls do post them.
Hope that helps - pls rate the post if it does.
Paresh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide