This document related to the routers but in my setup i have cisco ASA firewalls and these doesnot have the configuration like one present in the document. Although the document you have supplied is very good but didn't help me out in my scenario. Can you please help me out in respect to firewall.
I havent done this on ASA before, so I'm not sure how the packet loss is handled regarding the frequency/threshold/timeout. I can imagine the tracked object only failing if all the packets go misssing, but you should try it out in a lab to be 100% sure.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...