Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Router 1921 crypto issue

One of my client try to configure the crypto key,but the router is not taking the command.



What can be the issue...


Router has security and data base license installed.


Router detail is attached in snap.

8 REPLIES
Purple

Router 1921 crypto issue

Hi,

you need a security licence for IPSec VPNs, check it with show licence command.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
New Member

Router 1921 crypto issue

Hi Wajid,

If you are having security license the show version should display as below. If not license needs to be purchased. The IOS in the device is a universal image which will not have any features by default.

Technology Package License Information for Module:'c1900'

-----------------------------------------------------------------
Technology    Technology-package           Technology-package
              Current       Type           Next reboot 
------------------------------------------------------------------
ipbase        ipbasek9      Permanent      ipbasek9
security      securityk9    Permanent      securityk9
data          None          None           None

Regards,

Sathvik

New Member

Router 1921 crypto issue

Dear cadet,

router has securityk9 license install for evaluation version.

in detail it is showing:

License type: Evaluation

License State: Active, not is use, EULA Accepted

New Member

Router 1921 crypto issue

Hi Wajid,

Refer the below URL which would help you getting the  solution.

https://supportforums.cisco.com/thread/2175438

Regards,

Sathvi

New Member

Router 1921 crypto issue

Sathvik,

i am trying to solve this issue,still its in same condition.

Index 2 Feature: securityk9                    

        Period left: 8  weeks 4  days

        Period Used: 0  minute  0  second 

        License Type: Evaluation

        License State: Active, Not in Use, EULA accepted

        License Count: Non-Counted

        License Priority: Low

New Member

Router 1921 crypto issue

Hi Wajid,

The license typr should be permanent. Please check with cisco once. You are using a Evaluation license.

Index 2 Feature: securityk9                    

        Period left: 8  weeks 4  days

        Period Used: 0  minute  0  second 

        License Type: Permanent

        License State: Active, In Use

        License Count: Non-Counted

        License Priority: Low

Regards,

Sathvik

New Member

Router 1921 crypto issue

Hi,

Issue is resolved now.the problem with license is that it was not properly install.activation procedure for evaluation is diffarent then the normal license.

after installing,to activate we need to type below command and need to reload the license.after that only the license will take effect.

license boot module C1921 technology-package securityk9

Regards,

Wajid Dabir

New Member

Router 1921 crypto issue

Thanks for sharing the info

Regards,

Sathvik

235
Views
0
Helpful
8
Replies
CreatePlease to create content