router as a frame relay simulator

[shadowman724]

hello,

how can i configure a router to be a frame relay switch?

I have 3 1720 routers (A, B and C).

thanks

[leonvd79 · Accepted solution]

Hello,

You can do so by entering the command "frame-relay switching" in global configuration mode.

Example

!

frame-relay switching

!

interface Serial0

encapsulation frame-relay

frame-relay intf-type dce

frame-relay route 102 Serial1 201

clock rate 72000

no shut

!

interface Serial1

encapsulation frame-relay

frame-relay intf-type dce

frame-relay route 201 Serial0 102

clock rate 72000

no shut

!

Refer to the configuration guide for more information.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan_c/wcffrely.htm#wp1055601

HTH

--Leon

* Please rate posts.

[shadowman724]

thank you Leon

[ariela]

http://www.cisco.com/en/US/tech/tk713/tk237/tech_configuration_examples_list.html

"Configuring Frame Relay Switching"

HTH

Andrea