07-06-2006 02:34 AM - edited 03-03-2019 01:15 PM
hello,
how can i configure a router to be a frame relay switch?
I have 3 1720 routers (A, B and C).
thanks
Solved! Go to Solution.
07-06-2006 02:53 AM
Hello,
You can do so by entering the command "frame-relay switching" in global configuration mode.
Example
!
frame-relay switching
!
interface Serial0
encapsulation frame-relay
frame-relay intf-type dce
frame-relay route 102 Serial1 201
clock rate 72000
no shut
!
interface Serial1
encapsulation frame-relay
frame-relay intf-type dce
frame-relay route 201 Serial0 102
clock rate 72000
no shut
!
Refer to the configuration guide for more information.
HTH
--Leon
* Please rate posts.
07-06-2006 02:53 AM
Hello,
You can do so by entering the command "frame-relay switching" in global configuration mode.
Example
!
frame-relay switching
!
interface Serial0
encapsulation frame-relay
frame-relay intf-type dce
frame-relay route 102 Serial1 201
clock rate 72000
no shut
!
interface Serial1
encapsulation frame-relay
frame-relay intf-type dce
frame-relay route 201 Serial0 102
clock rate 72000
no shut
!
Refer to the configuration guide for more information.
HTH
--Leon
* Please rate posts.
07-06-2006 03:39 AM
thank you Leon
07-06-2006 02:53 AM
http://www.cisco.com/en/US/tech/tk713/tk237/tech_configuration_examples_list.html
"Configuring Frame Relay Switching"
HTH
Andrea
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide